was successfully added to your cart.

Basket

Learn about Nickel Sulphate in Blackfast 181

By November 15, 2018 November 27th, 2018 Knowledge

Firstly it should be pointed out that the research, which forms the basis of the new classification, carried out by the Rapporteur (Danish Environmental Protection Agency) was based purely on exposure in those industries that are major users of Nickel, i.e. nickel producing industries and nickel plating industries.

The category 1 carcinogenic classification of certain water soluble nickel compounds is linked only to inhalation (not by ingestion or dermal exposure). This means the issue is only relevant to occupational health in nickel-producing and certain nickel-using industries.

A cocktail of compounds exists in nickel refining situations and therefore the exact role of water soluble nickel compounds such as nickel sulphate or chloride, in terms of their contribution to cancer risk, has been unclear.

The recent risk assessment on Nickel, carried out by The Danish Environmental Protection Agency on which the EU classification is based, found as follows:

Respiratory exposure to nickel sulphate occurs only in an occupational exposure context, by inhalation of aerosols containing nickel sulphate, by definition an aerosol is an assemblage of small particles, solid or liquid, suspended in air.

Aerosols would commonly be created from a tank of liquid by bubbling air through it. As the air bubbles rise to the surface and break, small droplets of the solution are released into the air. Large drops fall back into the tank or deposit on surfaces nearby. Smaller droplets become airborne and drift into the general plant air where the workers can inhale them. Small droplets rapidly lose their water by evaporation, leaving behind solid particles made up of crystals of nickel salts and the other components of the bath. Blackfast 181 is not agitated and therefore should not be capable of producing aerosols.

Even if we assume the blacking process to be similar to electroplating and capable of producing aerosols it must be noted that Nickel Sulphate, in the average plating bath, is generally maintained in the concentration range of 150- 300 g/l. Blackfast 181, as supplied, contains less than 50g/l and diluted to working strength (25%) less than 11g/l.

The data available on groups of nickel species in workrooms indicated that nickel species are not uniform among electroplating shops. Nevertheless an estimate was made for a typical and a worst-case nickel speciation, but the validity of the estimated data remains unknown. TERA (1999) reviewed the toxicology of soluble nickel salts and on basis of the data on occupational exposure provided by NIPERA (1996) it was concluded that the median exposure by inhalation of soluble nickel salts was about 20 µg/m3 in electroplating operations.

We should therefore be able to conclude that Blackfast 181, if capable of producing aerosols, would produce, as an absolute maximum, half the amount of inhalable nickel that a plating bath would i.e. 10µg/m3. This equates to 0.01mg/m3.

Learn more about Nickel Sulphate in the blacking process

Engineering and construction firms have long utilised blacking methods to prevent metal tools and equipment from reflecting light because glare can be hazardous for workers.

A popular blacking process is known as electroplating, which describes the process of submerging an item in a solution containing nickel. However, if inhaled, nickel sulphate is carcinogenic.

Occupational health is a huge concern for all employers in settings where chemicals and machinery pose hazards, and if there are any traces of airborne nickel sulphate in your workplace, you might be breaking the law. Fortunately, there is an easier and better way to blacken metal, and it doesn’t risk contaminating the air that your employees breathe with a dangerous carcinogen.

 

Metal blacking with Blackfast

At Blackfast, we utilise a sophisticated chemical conversion process for blacking steel and iron items, and you’ll only find small traces of nickel sulphate in Blackfast 181, one of our most popular solutions.

More importantly, the nickel sulphate found in our solution doesn’t pose a health risk.

The carcinogen in question is only dangerous if inhaled as an aerosol, which in this context means any air-suspended solid or liquid particles. Usually, an aerosol containing nickel sulphate is produced by pumping air into a plating bath, but our blackening method requires no such treatment.

Furthermore, there is only a small trace of nickel sulphate in Blackfast 181 when compared to the average plating bath, minimising the threat that the carcinogen in question presents to people at your workplace.

 

Current occupational exposure limits for nickel Sulphate are as follows:

 

 

The benefits of metal blacking without nickel sulphate

New paAs described above; the primary reason to avoid nickel sulphate from becoming airborne in your workplace is to prevent related health conditions affecting your workers. However, the benefits of using a blacking solution that doesn’t release harmful levels of nickel sulphate extend far beyond that.

Our blacking solution doesn’t alter the dimensions or weight of your metal items, which is crucial for small objects such as screws and tools. Nickel sulphate in the blacking process has the potential to slightly change the surface of an object, rendering them unsellable or useless. Plus, because our products don’t apply an addition layer of material to an item, it’s one of the most affordable solutions over the long term.